Do you know the basic maintenance methods of the oxygen generator and its accessories?

1. How to clean the shell of the oxygen generator?
Turn off the power first, then soak the disinfectant with a clean and soft slightly damp cloth and wipe it. Be careful not to let the cleaning solution seep into the gap of the shell when wiping. The casing of the oxygen generator should be scrubbed at least once a month.
2. How to clean the water tank (humidification bottle)?
In order to keep the water tank clean, the water tank should be filled with cold boiled water or pure water, and it is best to change the water every two or three days. The water tank needs to be cleaned once a week, shaken with detergent and then rinsed with clean water to ensure hygiene.
After cleaning the water tank, please remember to put the water tank rubber plug back. Prevent oxygen from leaking from the water filling port, causing the machine not to work properly.
3. How should the oxygen generator be maintained if it is idle for a long time?
Take out the humidification water tank, pour out the water in the water tank, wipe it clean, and put it back in place. Then put away the power cord, and store the oxygen tube and oxygen absorber at room temperature, and pay attention to placing them in a place where they cannot be exposed to direct sunlight.
4. Before using the machine again, what preparations need to be done?
First check whether the power cord is damaged, and then replace with a new filter; clean or replace the oxygen pipe and oxygen absorber with a new one, and check whether it is knotted or blocked; it is best to clean the humidification water tank.
5. Do I need to change the filter of the machine?
Replacement is required, it is recommended to replace the filter every 1-3 months.
The filter can isolate the large particles in the air and prevent the large particles from clogging other filters when they enter the next filtration stage. When the filter of the oxygen generator turns black, it will cause problems such as low air volume, abnormal noise, insufficient concentration, and no oxygen output of the oxygen generator! So the filter needs to be replaced regularly!
6. How to clean the oxygen suction tube?
It is recommended to clean it every three days and replace it once a month. The oxygen inhalation tube directly helps us deliver oxygen, so it must be clean and hygienic! When cleaning, it can be soaked in 5% potassium permanganate solution for 5 minutes, and then wiped with clean water.