How To Use A Household Oxygen Generator?

1. The main engine is mounted on wheels as a floor-standing type or mounted on a rack against the wall and hung outdoors, and a gas extraction filter is installed.
2. Nail the oxygen supply plate on the wall or support as needed, and then hang the oxygen supply.
3. Use an oxygen tube to connect the oxygen outlet port of the oxygen supply, and connect the 12V power line of the oxygen supply to the 12V power line of the host. If more than one oxygen supply is connected in series, just add a three-way connector, and connect the pipeline with a wire buckle fixed.
4. Plug the 220V power cord of the host into the wall socket, and the red light of the oxygen supply will be on.
5. Please add pure water to the designated position in the humidification cup. Then install it on the oxygen outlet of the oxygen supply.
6. Please put the oxygen tube on the oxygen outlet of the humidification cup.
7. Press the start button of the oxygen generator, the green indicator light is on, and the oxygen generator starts to work.
8. According to the doctor's advice, adjust the flow to the desired position.
9. Hang up the nasal cannula or wear the mask to inhale oxygen according to the packaging instructions of the oxygen inhalation mask or nasal straw.