Operation Method Of Oxygen Concentrator

1. Install the main engine on the wheel as a floor-standing or hang it on a wall against the wall and hang it outdoors, and install a gas collection filter;
2. Nail the oxygen supply plate on the wall or support as needed, and then hang the oxygen supply;
3. Connect the oxygen outlet port of the oxygen supply with the oxygen tube, and connect the 12V power line of the oxygen supply to the 12V power line of the host. If multiple oxygen suppliers are connected in series, only need to add a three-way joint, and fix the pipeline with a wire buckle;
4. Plug the 220V power cord of the host into the wall socket, and the red light of the oxygen supply will be on;
5. Please add pure water to the designated position in the humidification cup. Then install it on the oxygen outlet of the oxygen supply;
6. Please put the oxygen tube on the oxygen outlet of the humidification cup;
7. Press the start button of the oxygen generator, the green indicator light is on, and the oxygen generator starts to work;
8. According to the doctor's doctor's advice, adjust the flow to the desired position;
9. Hang up the nasal cannula or wear the mask to inhale oxygen according to the packaging instructions of the oxygen inhalation mask or nasal straw.