Maintenance method of household oxygen generator

1. Regularly check the humidification water tank of the small household oxygen concentrator, and clean up the dirt in the humidification water tank. This is conducive to the cleanliness of oxygen, especially friends who directly inhale oxygen, but also to ensure the cleanliness of the humidification water tank.
2. Regularly check the operating system of the small household oxygen generator compressor to see if there is any air leakage. If there is a leak, it should be repaired in time, otherwise the pressure of the oxygen outlet will not reach the required level, thus affecting the oxygen production and oxygen absorption effect.
3. Check the air drying system of the small household oxygen concentrator. Check the dryer and oil-water separator, and clean up the impurities inside. The method is to blow into the oxygen outlet with the mouth first to increase the internal pressure. Then open the oxygen outlet valve to exhaust. Repeat the operation several times to get rid of the impurities inside.
4. Check whether the interface between the oxygen inhalation tube and the oxygen outlet of the small household oxygen concentrator is aging and leaking. If there is leakage, it will reduce the pressure of the oxygen inhalation outlet and affect the oxygen inhalation effect. It is best to replace the oxygen inhalation tube regularly.
5. Check the atomizer of the small household oxygen concentrator to ensure that there is sufficient water in it, otherwise the oxygen produced is too dry, and people who inhale dry air for a long time or who are sensitive to the respiratory tract will have a bad effect. It is best to change the water in the nebulizer regularly to ensure it is clean and sufficient.